KN-5853 Crude Oil Pour Point Tetser

Overview

  KN-5853 Curde Oil Pour Point Tester conforms to ASTM D5853 Standard Test Method for Pour Point of Crude Oils. After preliminary heating, the test specimen is cooled at a specified rate and examined a intervals of 3 celcius degree for flow characteristics. The lowest temperature at which movement of the test specimen is observed is recorded as the pour point

Low Temperature Bath Parameters

1. Input voltage: AC220V±10%, 50Hz

2. Power: 1500W

3. Cooling mode: Doule compressor compound cooling, air cooling

4. Test station: 2 baths and 4 test stations (two baths are controlled separately)

5. Temperature range: 30~-70℃

6. Temperature accuracy: 0.1℃

7. Temperature sensor: Pt100

8. Medium: about 2.5kg ethanol, ＞95% Purity

9. Cooling time: 30~-70℃ may take about 90min

10. Ambient temperature: Around 25℃

11. Relative humidity: No greater than 85%

High Temperature Technical Parameters

1. Digital display, PID temperature control

2. Be able to heat two test tubes or two pressure vessle

3. All stainless steel bath, no need water

4. Temperature range: 40~120℃

5. Temperature accuracy: ±0.2℃

6. Total power consumption: no greater than 1500W

7. Ambient temperature ≤30℃

8. Relative humidity≤85%