KN-7097 Thermo-Oxidation Engine Oil Simulation Tester

Overview

KN-7097 Thermo-Oxidation Engine Oil Simulation Tester conforms to ASTM D7097 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT and ASTM D6355 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test. Deposit-forming tendencies of an engine oil under oxidative conditions are determined by circulating an oil-catalyst mixture comprising a small sample of the oil and a very small (0.1g) amount of an organo-metallic catalyst. This sample mixture is then circulated for exactly 24h in the TEOST MHT instrument over a special wire-wound depositor rod heated by electrical current to a controlled temperature of 285℃ at the hottest location on the rod. The depositor rod is weighed before and after the test and any deposit formation on the rod as well as any deposits collected from rod washings are determined. During the test, precisely controlled and directed air is caused to bathe the oil flowing down the depositor rod and, thereby, to provide opportunity for oxidation. Precision of the test is strongly influenced by the care in manufacture of the wire-wound steel depositor rods and the treatment of the coating of the wound wire, the rate of air flow, and the amount and degree of mixing of the catalyst.

Features

1.         Crucial elements are all imported

2.         Be able to set the working time, the tester will stop working when times out

3.         ASTM D6335 test assembly is optional

4.         Catalyst magnetic mixing device to set mixing time and mixing speed

5.         Automatic electric flow controller to control the flow rate at 10ml±0.2ml/min

6.         All parameters are able to set on the touch screen, one button operation

Technical parameters

1.         Test temperature: Ambient~500℃±2℃

2.         Test time: 24 hours

3.         Sample weight: 8.4g

4.         Test mode: Automatic

5.         Pump flow rate: 0.25g/min

6.         Flow rate: 10ml±0.2ml

7.         Rated voltage: AC220V±10%, 50Hz