KN-1478 Low-Temperature Torque Tester

Overview

  KN-1478 Low-Temperature Torque Tester conforms to ASTM D1478 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease. This test method was developed using greases having very low torque characteristics at -54℃. Specifications for greases of this type commonly require testing at this temperature. Specifications for greases of other types can require testing at temperatures from -73℃ to -18℃.

  This test method has proved helpful in the selection of greases for low-powered mechanisms, such as instrument bearings used in aerospace applications. The suitability of this test method for other applications requiring different greases, speeds, and temperatures should be determined on an individual basis.

Features

1.        Test bearing, contains eight 7.9mm balls, separated by a two-piece, pressed steel cage, and standard radial clearance of 0.008~0.018mm

2.        Micro computer temperature controller, with range from ambient to -70℃

3.        Pt100 Temperature sensor, with accurate to 0.1℃

4.        Imported compound compressor, low noise

5.        Driving motor adopts high-speed ratio, 1740/1, to keep a stable rotating speed

6.        Low temperature tank adopts dedicated Insulating material, ambient environment will not affect the inner temperature

7.        Digital display the pull-in torque and running torque

8.        Brass grease cup, strictly conforms to the standard requirements

9.        Digital display working time and equipped with alarm function

10.    Stainless steel air bath

Technical parameters

1.        Cooling mode: Danfoss double-compressor cooling

2.        Temperature range: Ambient~-70℃

3.        Timer: Digital display

4.        Rotating speed accuracy:1rpm

5.        Torque test: Digital ergometer

6.        Torque accuracy: 0.1%

7.        Total power: 2000W

8.        Rated voltage: AC220V, 50Hz

9.        Size: 800*500*1300mm