Lube Oils
-
-
KN-92 Manual Cleveland Open Cup Flash Point Tester
Flash point is used in shipping and safety regulations to define flammable and combustible materials. Consult the particular regulation involved for precise definitions of these classifications.Read
more >
-
-
KN-92Z Automatic Cleveland Open Cup Flash Point Tester
Flash point can indicate the possible presence of highly volatile and flammable materials in a relatively nonvolatile or nonflammable material. For example, an abnormally low flash point on a test specimen of engine oil can indicate gasoline contaminationRead
more >
-
-
KN-92E Automatic Cleveland Open Cup Flash Point Apparatus
conforms to ASTM D92, we use electric igniter to ensure no gas touched during the testRead
more >
-
-
KN-93 Manual Pensky-Martens Closed-Cup Flash Point Tester
The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a materialRead
more >
-
-
KN-93Z Automatic Pensky-Martens Closed Cup Flash Point
The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a materialRead
more >
-
-
KN-93E Automatic Pensky-Martens Closed Cup Flash Point Tester
KN-93E Automatic Pensky-Martens Closed Cup Flash Point Tester conforms to ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8mm2/s (cSt) or more at 37.8℃ or 9.5mm2/s (cSt) or more at 25℃ (77℉), or that contain suspended solids, or have a tendency to form a surface film while under test. These departments for liquids using these test methods have established other classification flash poinRead
more >
-
-
KN-56Z Automatic Tag Closed Cup Flash Point Tester
Read
more >
-
-
KN-170Z Automatic Abel Closed Cup Flash Point Tester
KN-170Z Automatic Abel Closed Cup Flash Point Tester conforms to IP170 Petroleum products and other liquids -- Determination of flash point -- Abel closed cup method and ISO 13736 Petroleum Products and Other Liquids - Determination of Flash Point - Abel Closed Cup Method and IP170 Determination of flash point - Abel closed-cup method. This International Standard specifies a method for the determination of the closed cup flash point of petroleum products and other liquids having flash points betRead
more >
-
-
KN-6304 Coulometric Karl-Fischer Titration Tester
A knowledge of the water content of lubricating oils, additives, and similar products is important in the manufacturing, purchase, sale, or transfer of such petroleum products to help in predicting their quality and performance characteristicsRead
more >
-
-
KN-203 Volumetric Karl Fischer Moisture Titrator
although the volumetric KF titration can determine low levels of water,it is generally accepted that coumometric KF titrations are more accurate for routine determination of very low levels of water. as a general rule, if samples routinely contain water concentrations of 500Mg/kg or less,the coumometric tech should be considered.Read
more >