product
-
-
KN-4406B Portable Liquid Particle Counter
KN-4406B Portable Liquid Particle Counter is not only suitable for on-site testing, but also can be used as a laboratory analysis instrument. The instrument uses the light extinguishing principle to measure the size and count of fine particulate contaminants in liquid media. KN-4406B uses high-pressure and low-pressure interface, and precision syringe pump, strictly control the sampling volume accuracy. It can conduct off-line or on-line testing of oil of low viscosity or high viscosity.Read
more >
-
-
KN-3230 Salt Content of Crude Oil Tester
This tester measures the conductivity of a solution of crude oil in a mixed alcohol solvent when subjected to an electrical stress. This test method measures conductivity due to the presence of inorganic chlorides, and other conductive material, in the crude oil. A homogenized test specimen is dissolved in a mixed alcohol solvent and placed in a test cell consisting of a beaker and a set of electrodes. A voltage is impressed on the electrodes, and the resulting current flow is measured. The chloRead
more >
-
-
KN-6138 EMCOR Grease Testing Machine
New, cleaned, and lubricated bearings are tested partially immersed in water (distilled, synthetic sea water, or sodium chloride solution) under no applied load at a speed of 83 6 5 rpm in a predetermined sequence of running and stopping for a period of approximately one week. After cleaning, the bearing rings are examined and rated according to the degree of corrosionRead
more >
-
-
KN-2624 Digital Conductivity Meter
The ability of a fuel to dissipate charge that has been generated during pumping and filtering operations is controlled by its electrical conductivity, which depends upon its content of ion species. If the conductivity is sufficiently high, charges dissipate fast enough to prevent their accumulation and dangerously high potentials in a receiving tank are avoidedRead
more >
-
-
KN-Lab 131 Portable Octane and Cetane Tester
Determines the Pump Octane Number (AKI), Research Octane Number (RON), and Motor Octane Number (MON) of unleaded gasoline, ethanol blended gasoline, leaded gasoline and Cetane Number for diesel fuels.Read
more >
-
-
KN-300R Octane Number of Spark-Ignition Engine Fuel
Research O.N. correlates with commercial automotive spark-ignition engine antiknock performance under mild conditions of operation.
Research O.N. is used by engine manufacturers, petroleum refiners and marketers, and in commerce as a primary
specification measurement related to the matching of fuels and engines.
Empirical correlations that permit calculation of automotive antiknock performance are based on the general equation:Read
more >
-
-
KN-1500 Colorimeter for Petroleum Products
Determination of the color of petroleum products is used mainly for manufacturing control purposes and is an important quality characteristic, since color is readily observed by the user of the product. In some cases, the color may serve as an indication of the degree of refinement of the material. When the color range of a particular product is known, a variation outside the established range may indicate possible contamination with another product. However, color is not always a reliable guideRead
more >
-
-
KN-600T Cetane Number of Diesel Fuel Oil
KN-600T Cetane Number of Diesel Fuel Oil conforms to ASTM D613 Standard Test Method for Cetane Number of Diesel Fuel Oil. The cetane number of a diesel fuel oil is determined by comparing its combustion characteristics in a test engine with those for blends of reference fuels of known cetane number under standard operating conditions. This is accomplished using the bracketing handwheel procedure which varies the compression ratio (handwheel reading) for the sample and each of two bracketing refeRead
more >
-
-
KN-NIR Near Infrared Spectrometer
KN-NIR Near Infrared Spectrometer adopts advanced MEMS Fourier transform technology. Optional spectral range of the instrument (1300nm~2600nm, 1150~1700nm, 1250~2100nm) meets the needs in testing multiple indicators and research. High signal to noise ratio is possible to analyze the parameters of low content of the sample. Built in wavelength calibration to ensure smaller difference between stations difference and better long-term stability. The tester equipped with a temperature control device,Read
more >
-
-
KN-5185 ICP for used Lube Oils
22 elements in used lubricating oils and in base oils, and it provides rapid screening of used oils for indications of wear. Test times approximate a few minutes per test specimen, and detectability for most elements is in the low mg/kg range. In addition, this test method covers a wide variety of metals in virgin and re-refined base oils. Twenty-two elements can be determined rapidly, with test times approximating several minutes per test specimen.Read
more >